I believe most people have encountered the same problem, that is, a motorcycle ride a long chain of noise will become increasingly large, in addition to the chain of oil for too long did not spray lubricants recession, the stick in the chain sand / small stone is also one of the reasons, another factor is the beginning of the chain gap is too tight tone.Therefore, we have to clean the chain in time to ensure that the chain Life and our "life safety".
1. When should lubricate the chain, your user manual will have time to explain, but it is not recommended to do that, my proposal, when needed to do any time, that is, any sounds or looks very dry, if it sounds like this, it is definitely the get.
2. The lubricant, choose a lot, there are a variety of recommendations, but in fact, different environments need different lubricants, if you are riding in a rainy place, it needs the lubricant sure and Dry areas are not the same.
3. The completion of this work requires some tools: need to wipe, will not hurt the O-ring kerosene chain cleaning agent, the old toothbrush or a special chain cleaner brush, rear wheel bracket, chain lubricants, a paper shell and rubber gloves.
If the chain is dirty, it is necessary to clean before lubrication, if not dirty, then spray some detergent on the cloth to wipe, if dirty, it is necessary to pour the detergent on top, and then carefully with a brush Brush, let the chain through the brush.
Clean the end of the lubricant, we must say clearly, we want to be on this part of the lubricant, the chain on both sides of the side gasket and the chain overlap part of the right hand turn the wheel, the first inner ring lubrication chain.
Take a run out of the rag, the chain of excess chain oil wipe clean, so that the probability of chain oil splashing as low as possible, you can also reduce the possibility of sticky clay chain, so complete.
